Gianneschi Axial Blowers
Axial Blowers (ELL)
- Painted steel casing- Reversible impeller in die-cast aluminium
- Protection grill
- Wide Range
| Model | Voltage | Max Deliv. m³/min | Max Head mm H2O |
| Minitube 190 | 12-24 | 900 | 15 |
| ELL 215/2 | 12-24-230-400 | 22 | 10 |
| ELL 250/2 | 12-24-230-400 | 30 | 12 |
| ELL 250/3 | 12-24-230-400 | 34 | 16 |
| ELL/R 256/2 | 12-24-230-400 | 32 | 14 |
| ELL/R 256/3 | 12-24-230-400 | 36 | 17 |
Download ELL - ELL/R Technical Document
Axial Blowers (ELL/AP)
- Painted steel, s/steel inox or aluminium casing
- Variable pitch blades
- Protection grill
- Diameter available up to 1250 mm
- Ideally functioned by an inverter (variable speed)
- Customized models available according to performance and dimensions
The axial fans ELL/AP series use high efficiency aerofoil profile impellers. They are suitable for compartments ventilation where is required large capacities at pressure relatively low, like yachts and mega-yachts engine rooms. This series, differently from normal axial fans, presents higher performances. These blowers can work with the axis vertical or horizontal oriented that allows to attach the blower to ceiling or wall. All blower are reversible type, but obviously they have a preferential flow direction ( indicated by A flux or B flux).
| Model | RPM | Max Deliv. m³/min | Max Head mm H2O |
| ELL/AP 313 | 1450 | 50 | 10 |
| ELL/AP 316 | 2900 | 90 | 40 |
| ELL/AP 353 | 1450 | 60 | 15 |
| ELL/AP 359 | 2900 | 120 | 50 |
| ELL/AP 403 | 1450 | 95 | 20 |
| ELL/AP 406 | 1750 | 120 | 30 |
| ELL/AP 409 | 2900 | 190 | 70 |
| ELL/AP 453 | 1450 | 135 | 20 |
| ELL/AP 456 | 1750 | 160 | 30 |
| ELL/AP 459 | 2900 | 270 | 85 |
| ELL/AP 503 | 1450 | 170 | 30 |
| ELL/AP 506 | 1750 | 210 | 40 |
| ELL/AP 563 | 1450 | 270 | 35 |
| ELL/AP 566 | 1750 | 320 | 50 |
| ELL/AP 633 | 1450 | 380 | 45 |
| ELL/AP 636 | 1750 | 460 | 65 |
| ELL/AP 714 | 1450 | 500 | 50 |
| ELL/AP 719 | 1750 | 615 | 75 |
| ELL/AP 804 | 1450 | 730 | 65 |
| ELL/AP 809 | 1750 | 835 | 90 |
| ELL/AP 904 | 1450 | 945 | 72 |
| ELL/AP 909 | 1750 | 1200 | 105 |
Download ELL/AP Technical Document
Axial Blowers ELL SR
- Robust casing with "diffusor vanes" to carry out performance
- Aluminium variable pitch blades in fixed position
- Top of the range in pressure / efficiency / noise
In both models the housing is made of Fe360 steel sheet with a large suction nozzle. The connection flange is made according to DIN 24154. An down stream guide vanes gives an improvement of the performances, particularly pressure, efficiency and noise. The presence of down stream guide force the system to be
used only in “blades-motor” flow direction, for this reason both models are not reversible.
| Model | Delivery range m³/min | Head Range mm H2O |
| 560 | 90/460 | 10/200 |
| 630 | 150/660 | 10/250 |
| 710 | 240/960 | 20/330 |
| 800 | 300/840 | 25/120 |
| 900 | 300/1200 | 10/155 |
| 1000 | 400/1680 | 12/190 |
Download EL-ST EL-SR Technical Document